白色车体被磕出一个小洞，请问如何自己修补？谢谢诸位大虾了 

发现这个磕碰的时候觉得像是高速上被石头打中的，也有朋友说可能停车场被碰到。 破损面积不大，约有2/3个手指肚大小，未见黑色漆底，漆层有凹陷感，车体本身没事。请教自己动手如何修补？ 珍珠白色3层漆 小磕碰也心烦。。。 [attachment=308297]

很麻烦，而且如果你没有设备和动手能力的就别去弄，你的照片不清楚，貌似漆面已经破坏掉了，单纯抛光没用的。最简单的方法是拿补漆笔涂一下，但是效果很差。

谢谢楼上，表面漆确实已经破损，露出内层的白色（底漆？），我担心不处理是否会让破损面积加大，或者内层会继续脱落什么的

顺便说一句，怎么照也照不清楚，也许该换个相机了。。。。佳能s70。。。。哎

先用膠帶把坑洞周圍包覆起來 再用原廠的填補劑補平 讓原本的坑洞平滑之後再上原廠色漆   色漆上好之後再用細的磨砂把表面磨平 在用研磨拋光鏡面上臘 最後撕掉周圍膠帶   如果需要專業幫忙可以來我的店裡 麗晶廣場地下停車場P1      109shibuya  Car  Wash   [s:200]

[quote]引用第4楼109涉谷于2010-02-04 20:20发表的  : 先用膠帶把坑洞周圍包覆起來 再用原廠的填補劑補平 讓原本的坑洞平滑之後再上原廠色漆   色漆上好之後再用細的磨砂把表面磨平 在用研磨拋光鏡面上臘 最後撕掉周圍膠帶   如果需要專業幫忙可以來我的店裡 麗晶廣場地下停車場P1      109shibuya  Car  Wash   [s:200][/quote] 英雄！[s:198] 多谢大虾指点，我先看看研究一下，有不明白的还要请教[s:220]

看不清楚

Clear the edges,use factory touch up paint. Still visible for sure,but prevent rust, if not plastic parts

[quote]引用第7楼khc于2010-02-04 22:42发表的  : Clear the edges,use factory touch up paint. Still visible for sure,but prevent rust, if not plastic parts[/quote] 这就去买，谢了您哪

touch up paint + clear coat

i think its faster to just take it to a auto body shop since they do it faster, if its not perfect you get them to re-do it compared to doing it your self. you'll need to prepare the materials first. What materials do u need? well let see.. 1. 2 or 3 pieces of 2500 unigrit sandpapers.(prepare 1 for wet sanding, or just soak 1 in a little bit of car wash for 15 minutes) 2.the manufacture touch up paint. 3.RO like XP7424 or...any other porter cable. 4.Menzerna Intensive polish 5. followed by Menzerna Final Finish Polish blah blah blah and the steps are yet to be revealed..its a long story for the steps.and i don't wanna give it away the procedures to autobody detail since..i see we have some ppl in that field..but the pictures when you wet sand will look like this,. [attachment=308598] and when its done it looks like this. [attachment=308599] The pictures are not mine but from a forum i found.and i do not take any credit for it. Plus this is educational use >_>